- Can I use this charger for lithium-ion batteries?
Yes, the Blue Smart IP22 Charger supports lithium-ion batteries, including LiFePO₄. You can select the appropriate mode in the VictronConnect app. With advanced manual settings, you can configure it to work with other types of lithium-based batteries: Li-ion, Li-Po, LiCoO2, LiMn2O4, Li-NMC or NMC, NCA,
- Can I charge two different types of batteries at the same time? (Question for models with three outputs)
No, batteries of the same chemistry can be charged at the same time. For example, lead-acid batteries of the AGM, GEL types and starter batteries can be charged at the same time. But lead-acid and lithium-based batteries cannot be charged. Why is this: several isolated outputs are not regulated separately, one charging algorithm (charge cycle and charge voltage) is applied to all outputs; accordingly, all batteries must be compatible with the common charging algorithm.
- How to connect to the device via Bluetooth?
Download the VictronConnect app on your smartphone or tablet. Turn on Bluetooth, open the app and select the charger from the list of available devices. If the pin code is not indicated on the device or packaging, use “000000” - six zeros.
- What to do if the device does not connect via Bluetooth?
Make sure the device is turned on and within Bluetooth range. Restart the charger and the app. If the problem persists, remove the device from the Bluetooth settings on your smartphone or tablet. The charger connects via the VictronConnect app, not the Bluetooth menu!
- Is this device suitable for boats and wet rooms?
Yes, although the charger has an IP22 protection class, which means it can only be used in dry conditions, its components are filled with a special compound that protects them from moisture. According to the instructions, the humidity should be up to 98%. But if the device can be submerged in water, we recommend using devices with a higher level of protection (IP65/IP67), the Blue Smart IP67 Charger or Blue Smart IP65 Charger series.
- How does the "Storage Mode" work?
This mode automatically reduces the charging voltage after the battery is fully charged, reducing the risk of overcharging and extending the battery life.
- Can this device be used as a power supply?
Yes, the Blue Smart IP22 Charger has a Power Supply mode that allows you to use the device as a DC power source.
- How often should the charger software be updated?
It is recommended to check for updates in VictronConnect app every few months to access new features and improvements.
- Why are there no battery connection cables included?
This is a professional charger that is often installed permanently in vehicles (cars, boats, speedboats) and requires an individual cable length.
Use a flexible multi-core copper DC power cable with sufficient cross-sectional area with an appropriate fuse or circuit breaker.
- How do you charge three batteries simultaneously? (Question for models with three outputs)
You can charge one, two or three batteries of the same chemical type simultaneously, most often these are lead-acid AGM, GEL or starter batteries. Each battery is charged individually to its condition depending on the depth of discharge. The current is intelligently distributed as needed between the three channels of the charger and 100% is also available from each individual channel.
- Will the warranty be voided if the mains plug is cut off?
No, the warranty is not voided if you need to replace or extend the 230V mains cord. The standard length of 1.5 meters is sufficient in most situations, but you have the right to use the device as you see fit.