|
Quantity
|
Total
|
||
|
|
|||
Ready-to-install single-phase backup power kit
Ready-to-install single-phase backup power kit based on the Victron Energy Quattro-II 48/5000/70-50/50 230 V 5 kVA / 4 kW and a LiFePO₄ Sunlight Power ESS 51.2 V 100 Ah&h provides an energy reserve of 10.24 kWh, automatic switching between the grid and the battery (≤20 ms), and a fast charging speed — up to 2.3 hours.
The runtime is listed in the technical specifications depending on the load power.
Unlike budget alternatives, this kit features unique technological capabilities that ensure comfort, stability, and complete control over the power supply for your home or business.
Unique features of the Victron Quattro inverter
⚡ Two independent AC IN inputs — complete flexibility
The Victron Quattro inverter has two full-featured grid inputs (AC IN 1 and AC IN 2), opening up a wide range of application options:
- Connecting two independent inputs from different substations or power sources — the system can automatically switch between them based on priorities. For example, if power is lost on the main input, the Quattro instantly switches to the backup. Combination of grid and generator.
- Grid + generator combination — a classic scenario where AC IN 1 is connected to the utility grid and AC IN 2 to a diesel or gasoline generator.
🔄 Intelligent generator operation algorithm
- Automatic start: when the battery charge level (SoC) drops to a set threshold—for example, 25%—Quattro sends a command via the Cerbo GX Mk2 to automatically start the generator with mandatory preheating.
- Parallel operation: during operation, the generator not only powers the load but also charges the battery via a powerful built-in charger
- Automatic shutdown: once the set charge level is reached (for example, 90%), the system switches the generator to cooling mode, lets it run for a few minutes at idle speed, and then automatically shuts it down.
- Flexible schedule: using Cerbo GX, you can set a schedule specifying the hours when the generator is allowed to run (for example, from 8:00 AM to 10:00 PM), and at night — disable auto-start to avoid noise
- Remote control: the owner can disable automatic startup and start or stop the generator manually from a smartphone or computer. At the same time, you can immediately set the maximum runtime (for example, 60 minutes).
⚙️ Working with low-power generators
The PowerControl and PowerAssist functions allow the Quattro to operate even with low-power generators.
When the load exceeds the generator’s capacity, the inverter draws power from the battery, and when the load decreases, recharges the batteries.
This ensures stable operation without the risk of overloading the generator and without power outages, even during peak demand.
⛽ Fuel Monitoring and Maintenance
We offer installation of a fuel level sensor , the data from which is displayed in the Cerbo GX / VRM system.
The owner can view the current fuel level, and the system can send a notification if the tank is running low (this feature is supported by Cerbo GX via an analog input).
The system also keeps track of the generator's operating time and reminds the user about maintenance—oil changes, filter replacements, or spark plug inspections.
Total-Energo LLC provides a full range of services for generator maintenance and repair, including sensor calibration, starting system checks, and integration with VRM.
Advantages of the TQS 230V Kit
⚡ High grid power transfer capacity
When connected to the grid, the system can pass up to 22 kW, allowing you to run several high-power devices simultaneously. The limitation to the inverter’s rated power of 4 kW applies only when operating on batteries.
🚀 Peak power 10 kW
Thanks to its high overload capacity, the system easily powers high-performance pumps, refrigeration compressors, HVAC equipment, and electric motors even when running on battery power.
🔋 Fast battery charging
The built-in powerful charger allows you to fully charge the battery in just 2.3 hours, so the system is always ready for new outages.
The battery charging process is controlled by the built-in BMS (Battery Management System), which continuously exchanges information with the charger during charging. Voltage and current are adjusted according to the battery’s requirements.
This feature makes the backup power system completely safe to use.
📱 Full control from your smartphone
Thanks to the VictronConnect and VRM Portal, you get full control over the system in real time. On the screen, you can see:
- presence or absence of mains power;
- current load;
- battery charge level (%);
- charger status.
We will help you set up notifications for all key events:
-
switch to battery power;
-
restoration of power supply;
-
critical discharge or overheating of the battery;
-
starting or stopping the generator (if connected);
-
any errors or overloads.
Use convenient Victron widgets to quickly monitor the system status right on your phone's home screen.
⚙️ PowerControl and PowerAssist
If your grid is weak, and the circuit breaker trips frequently, the Victron system can help. Thanks to the PowerControl and PowerAssist features, the inverter supplements grid power with battery power, allowing you to safely use high-power appliances.
📞 Call our managers to find out how this feature can help you specifically.
☀️ Solar Ready — ready for solar energy
All system components are fully ready for operation as part of a solar power plant. Quattro inverters are compatible with grid-tied inverters from Fronius, SMA, ABB, and SolarEdge, making it easy to convert an existing system into a hybrid system—with the ability to store energy in a battery and operate even without grid connection!
🔄 Scaling
Quattro inverters can be connected in parallel or in a three-phase configuration. You can start with a single-phase solution and then expand the capacity or switch to a three-phase system.
Sunlight batteries support operation of up to 32 modules in parallel, thanks to special firmware developed for Victron Energy inverters.
🛡️ 100% safe to use
The kit is installed in accordance with all manufacturer requirements and the actual conditions at the customer’s site. The system continuously analyzes hundreds of parameters—from load and voltage to temperature and battery condition.
In the event of a deviation from normal parameters , a service notification is sent to the service center of &“Total-Energo” LLC and the user.
🧾 Warranty and Certification
Installation is performed in accordance with the manufacturers' instructions, which guarantees free replacement of components under warranty (5 years).
For private, commercial, and government clients, an annual service agreement is available, which includes:
- software updates to the latest version
- analysis and monitoring of parameters
- inspection of connections and nodes
All major system components have international and Ukrainian certifications, which is important for participation in “green tariff” or “net billing” programs.
The kit includes
1 × Cerbo GX MK2 Victron Energy Communication Center
1 × Victron Energy Quattro-II 48/5000/70-50/50 48/230V 5kVA/4kW hybrid
1 × Victron Lynx Power In 1000 (M10) Modular Distribution Busbar
1 × Battery Switch ON/OFF 275A
2 × Victron MEGA-fuse 100A/80V
1 × Victron MEGA-fuse 200A/80V
2 × Sunlight Power ESS LiFePO₄ Battery 51.2V 100Ah with built-in BMS
1 × Quattro Inverter Setup with LiFePO₄ Batteries
1 × Installation Kit for Consumables 230V 3-5kW
1 × 19" 16U Battery Rack (400 mm depth)
2 × 400 mm 1U 19" Battery Shelf
⚙️ Installation Algorithm
Needs Assessment
The first stage, during which the manager identifies the tasks that the UPS system must perform. This allows us to develop preliminary technical specifications.
Preliminary Calculation
To agree on the cost of the system and select the optimal configuration.
Reservation and payment
Reserving the necessary parts in stock, generating an invoice, and, if necessary, preparing a supply contract.
Engineer visit to assess the site
An on-site inspection is sometimes mandatory, for example, when installing high-power systems, or for additional work, such as when an uninterruptible power supply (UPS) system needs to be integrated with an existing generator.
Preparation of consumables
Mounting hardware, AC and DC cables, protective and insulating materials, etc.
Electrical installation work
Delivery and electrical installation work usually take place on the same day. Installation time ranges from a few hours to several days for high-power systems. The cost of delivery and electrical installation services is calculated separately for each case.
Commissioning and Testing
Configuration and verification of the uninterruptible power supply system in all modes: charging, discharging, simulation of power outages and restoration, etc.
Handover of documentation and control rights
Warranty card and, if necessary, additional documents (certificates, invoices, etc.), as well as user training. User registration for the VRM cloud service and transfer of rights for monitoring and operating the system. If necessary – assistance with installing apps on a phone for monitoring and configuring push notifications.
Online support via VRM
The UPS will be under constant monitoring to ensure there is no indication of potential discrepancies in power output or battery capacity. The service center monitors all technical parameters of each component to ensure they remain within the normal range.
Consulting
Throughout the entire service life, we provide remote support and answer your questions. If necessary, engineers will visit the site.
Annual Maintenance
We strongly recommend performing annual maintenance on the systems to ensure 100% compliance with manufacturers’ requirements.
💬 Get professional advice right now!
We support our clients at every stage—from equipment selection to post-warranty service.
Call us or submit a request on our website — engineers from Total-Energo LLC will select the optimal system configuration tailored to your specific needs.