|
Quantity
|
Total
|
||
|
|
|||
|
|
|||
EV Charging Station EVC300400300 — is a smart alternating current (AC) charging station designed by Victron Energy to fully integrate into your energy space. It provides up to 22 kW of power in three-phase mode or up to 7.3 kW in single-phase, supports GX devices and VRM, has built-in Wi-Fi, Bluetooth, touch display and light ring.
It's not just an electric vehicle charger — it is part of your energy system that interacts with solar panels, batteries and energy planning.
Key Benefits of EV Charging Station
- Maximum charging power: 22 kW (3 × 32 A) / 7.3 kW (1 × 32 A)
- Supports single- and three-phase networks, automatic detection
- Connector type: IEC 62196 (Type 2) — universal for most electric vehicles
- Wi-Fi and Bluetooth — control from your phone or browser
- Built-in 4.3” LCD touch display — quick control and statistics viewing
- Ring light indication (55 modes) — visual charging status
- Smart integration with VRM portal and GX devices (Cerbo GX, Ekrano GX)
- Predicted charging from solar energy or according to a schedule
- Low own consumption: only 15 mA at 230 V
- Electricity cost setting (€ / kWh) — with session accounting
Technological features
Three operating modes — full control over energy
1. Manual Mode
Set the current strength (6-32 A) directly from the screen or web interface.
You can start or stop charging manually when the car is connected.
2. Automatic Mode (with PV integration)
The inverter detects excess solar energy in the system (e.g. ESS) and directs it to the car charger.
Charging without grid consumption!
3. Scheduled Mode
Flexible timer allows you to charge your car at certain times (for example, at night at a cheap tariff).
Solar integration (ESS Ready)
This charging station is ideal for users of Victron ESS systems:
- Uses only PV surplus, avoiding grid usage
- Sets charging logic depending on battery and generation status
- Operates in modes: PV priority, time priority, battery priority
Full control via Victron ecosystem
- VRM-portal – remote monitoring, reports, notifications
- GX-devices (Cerbo GX / Ekrano GX) – control from one screen
- VictronConnect – full configuration from a smartphone via Bluetooth
Usage scenarios
• Charging an electric car at home from excess solar energy
• Commercial charging with cost control and statistics
• Charging at night at a cheap tariff (schedule)
• Integration with PV + Battery system Victron ESS
• Reporting and cost control in VRM-portal
Communication interfaces
- Wi-Fi (802.11 b/g/n) – Connection to a local network or Access Point
- Bluetooth – Control from a phone via VictronConnect
- Modbus TCP – Data exchange with GX, SCADA, automated systems
- GX-devices– Full integration into the Victron system (Cerbo GX, Ekrano GX)
Support in Ukraine
LLC “Total-Energo” — official installer of Victron EV Charging:
• Selection and design taking into account solar energy
• Installation and setup of charging
• VRM service and support
• Connection to ESS, generators, automation