|
Quantity
|
Total
|
||
|
|
|||
|
|
|||
Jinko Solar Tiger Neo 72HL4-BDV Solar Battery (590 W) — is a high-efficiency bifacial solar module with double glass, designed to achieve maximum generation and reduce the levelized cost of electricity (LCOE). Thanks to the advanced N-type with tunnel oxide passivation contact (TOPCon) technology and the company's HOT 2.0 innovation, this panel demonstrates extreme reliability, minimal degradation (LID/LeTID) and exceptional performance in low light conditions.
Main advantages of the Jinko Solar Tiger Neo 590 W photovoltaic module
- High efficiency: The efficiency of the 590 W model is 22.84%, which guarantees maximum heat output from every square meter of your roof or ground structure.
- Bifaciality: The bifaciality coefficient is 80±5%. The ability to capture reflected light from the back increases the total energy output by up to 25% (depending on the albedo of the surface).
- SMBB Technology: The multi-busbar design (Super Multi Busbar) improves light capture and current collection, increasing the output power and reliability of the module.
- Double tempered glass: The 2.0 mm thick front glass with anti-reflective coating and 2.0 mm back heat-strengthened glass make the panel as resistant to microcracks, moisture and aggressive environments as possible.
Detailed technical specifications (STC)
Optimized electrical parameters make the Jinko Solar JKM-590N-72HL4-BDV module an ideal choice for modern grid and hybrid inverters.
- Maximum power (Pmax): 590 W
- Open circuit voltage (Voc): 52.90 V
- Short circuit current (Isc): 14.07 A
- Voltage at maximum power (Vmp): 44.17 V
- Current at maximum power (Imp): 13.36 A
- Output power tolerance (Power Tolerance): 0 ~ +3% (guarantee of positive deviation)
- Temperature coefficient Pmax: -0.29%/°C (excellent indicator for stable generation in summer heat)
- Maximum system voltage: 1500 V DC (IEC)
- Maximum series fuse rating: 30 A
Mechanical parameters and design
- Type and number of photocells: N-type monocrystalline, 144 cells (72 × 2).
- Overall dimensions: 2278 × 1134 × 30 mm.
- Module weight: 31.0 kg.
- Frame: Anodized aluminum alloy.
- Junction box: Protection class IP68 (completely waterproof and dustproof).
- Connection cable: Cross section 4.0 mm², length: +400 mm / -200 mm (or individual length).
- Mechanical load: Withstands heavy snow loads up to 5400 Pa (front side) and wind loads up to 2400 Pa (rear side).
Minimal degradation for maximum profit
Investing in Jinko Solar Tiger Neo solar panels N-type, you get a station that will operate with maximum efficiency for decades. The power degradation in the first year of operation is only 1%. Starting from the 2nd to the 30th year, the annual power reduction does not exceed 0.4%. This guarantees that after 30 years of continuous operation, the panel will retain at least 87.4% of its initial power.
Service support in Ukraine
TOV “Total-Energo” offers a comprehensive solution: design, equipment selection, installation and professional maintenance of solar power plants based on Jinko Solar panels. We provide full service support and help you maximize the potential of your energy project in Ukraine.
Compatibility with charge controllers and inverters
- Works perfectly as part of hybrid systems with Victron Energy based on MultiPlus and Quattro inverters + SmartSolar MPPT RS 450/200 and 450/100 controllers for large-scale projects, as well as SmartSolar 250/85, 250/100 controllers for smaller systems.
- Absolute compatibility with grid-connected inverters that support string voltages up to 1500 V DC. We strongly recommend using Fronius inverters (Austria) to guarantee flawless operation of the station!
Certification and quality standards
The photovoltaic module has a guarantee of protection against the PID effect (Anti-PID Guarantee) and meets the highest international quality and safety standards: IEC61215, IEC61730, IEC61701 (salt tuman), IEC62716 (ammonia), ISO9001:2015, ISO14001:2015 and ISO45001:2018. Fire safety class — IEC Fire Type Class C, electrical safety — Class II.