|
Quantity
|
Total
|
||
|
|
|||
|
|
|||
Jinko Solar Tiger Neo 48HL4M-BDV (450 W) solar cell — is a highly efficient bifacial (Bifacial) solar module with double glass, which is ideal for facilities with limited space due to its compact size. The use of advanced N-type with tunnel oxide passivation contact (TOPCon) technology, multi-bus structure SMBB and proprietary HOT 3.0 development ensures ultra-high performance, minimal degradation and excellent generation even in low light conditions.
Main advantages of the Jinko Solar Tiger Neo 450 W solar module
- High efficiency with compact size: The efficiency of the 450 W model is 22.52%. The smaller length (1762 mm) and weight (24 kg) make it extremely convenient for installation on roofs of complex configuration.
- Bifaciality: The bifaciality coefficient is 80±5%. The ability to collect reflected light from the back side provides significant additional energy production and reduces the system payback period.
- SMBB technology: The innovative structure of the current-collecting busbars improves light capture and reduces the risk of microcracks.
- Extreme resistance to loads: The panel has a reinforced design and is certified to withstand unprecedented frontal loads of up to 6000 Pa (snow) and rear loads of up to 4000 Pa (wind).
- Premium warranty: The manufacturer provides a 15-year full product warranty (materials and assembly) and a 30-year warranty on the preservation of linear power.
Detailed technical specifications (STC)
Optimal electrical parameters make the Jinko Solar JKM-450-48HL4M-BDV module an ideal choice for modern grid-tied, hybrid and stand-alone inverters.
- Maximum power (Pmax): 450 W
- Open circuit voltage (Voc): 36.19 V
- Short circuit current (Isc): 15.65 A
- Maximum power voltage (Vmp): 30.53 V
- Maximum power current (Imp): 14.74 A
- Output power tolerance (Power Tolerance): 0 ~ +3% (guarantee of positive deviation)
- Temperature coefficient Pmax: -0.29%/°C (guarantees stable operation and minimal losses in summer heat)
- Maximum system voltage: 1500 V DC (IEC)
- Maximum series fuse rating: 35 A
Mechanical parameters and design
- Type and number of photocells: N-type monocrystal, 96 cells (48 × 2).
- Overall dimensions: 1762 × 1134 × 30 mm (perfect balance of power and size).
- Module weight: 24.0 kg.
- Frame: Anodized aluminum alloy.
- Glass: Dual Glass. Front — 2.0 mm tempered with anti-glare coating, rear — 2.0 mm thermoset.
- Junction box: Protection class IP68 (completely waterproof and dustproof).
- Connection cable: Cross-section 4.0 mm², length: +400 mm / -200 mm (or customized).
Minimal degradation for maximum profit
Thanks to HOT 3.0 technology and N-type cells, the panel has an extremely low degradation rate (LID/LeTID). In the first year of operation, the power loss is no more than 1%. Starting from the 2nd to the 30th year, the annual power reduction does not exceed 0.40%. This means that after 30 years of continuous operation, the panel will retain at least 87.4% of its initial power.
Service support in Ukraine
Total-Energo LLC offers a comprehensive solution: design, equipment selection, installation and professional maintenance of solar power plants. We provide full service support and help you maximize the potential of your energy system in Ukraine.
Compatibility with charge controllers and inverters
- Works perfectly as part of hybrid systems with Victron Energy based on MultiPlus and Quattro inverters + SmartSolar MPPT controllers. Since the panel has a slightly lower voltage (Voc 36.19 V), it allows for very flexible string formation for SmartSolar 250/60, 250/70, 250/85, 250/100 controllers, as well as RS 450/100 and 450/200 models.
- Full compatibility with modern grid-connected inverters (up to 1500 V DC). We strongly recommend Fronius inverters from the Austrian companyo premium quality manufacturer!
Certification and quality standards
The module meets the highest global standards: IEC61215:2021, IEC61730:2023, IEC61701 (salt fog resistance), IEC62716 (ammonia), ISO9001:2015, ISO14001:2015 and ISO45001:2018. Fire safety class — IEC Fire Type Class C, electrical safety — Class II.