|
Quantity
|
Total
|
||
|
|
|||
|
|
|||
The Victron Energy Smart BMS 12/200 (200 A, 12 V) battery management system – is a compact, versatile solution for managing Victron Energy lithium iron phosphate batteries rated at 12.8 V. This BMS is designed specifically for systems with 12 V generators in cars, RVs, yachts, and stationary applications. It combines a current limiter, battery combiner, battery protection, and Bluetooth monitoring in a single device.
Key benefits of the Smart BMS battery management system
- Power – supports charging/discharging currents up to 200 A and peak currents up to 400 A.
- Generator protection – limits the charging current from the generator to prevent overheating (up to 100 A with a 125 A fuse).
- Compact and robust housing – IP65 protection rating, operating temperature range –40…+60°C.
- Bluetooth – full diagnostics and configuration via the VictronConnect app.
- Safe integration with any Victron inverter, including MultiPlus, Phoenix, Cerbo GX, etc.
- MOSFET switching – spark-free circuit switching.
Technical Features
- Alternator/Starter Batt+ Port – electronic current limiting to ~90% of the fuse rating, safe charging of LiFePO₄ batteries from the alternator.
- System+ Port – supports both battery charging and discharging (up to 200 A), as well as connecting loads (inverters, controllers, relays).
- Smart outputs:
- Load disconnect – disconnects the load when the charge is low.
- Charge disconnect – protects the battery from overcharging or high temperatures.
- Pre-alarm – issues an alarm signal before the system shuts down.
- Remote control (Remote on/off) – supports multiple system on/off modes.
- Supports up to 20 batteries in parallel – total capacity up to 84 kWh!
Use Cases
- Off-grid campers, caravans, and motorhomes.
- Marine vessels and yachts with 12V systems.
- Mobile laboratories and special-purpose vehicles.
- Building safe, high-performance 12V ESS systems.
- Integration into industrial solutions using Victron Energy Smart LiFePO4 batteries.
Communication interfaces
- Bluetooth – configuration and monitoring via VictronConnect.
- Relay outputs – control of charging, load, and alarms.
- Support for Victron interfaces: compatible with SmartShunt, Cerbo GX, MultiPlus, Color Control GX, and more.
Smart integration with Victron systems
The Smart BMS 12/200 pairs perfectly with:
- Victron LiFePO4 Smart batteries.
- MultiPlus / Quattro / Phoenix inverters.
- Cerbo GX and Ekrano GX monitoring centers.
- MPPT solar controllers.
- Smart BatteryProtect protection devices.
- SmartShunt / BMV-712 for accurate battery status measurement.
Service support in Ukraine
Total-Energo LLC – the official partner of Victron Energy in Ukraine.
We offer comprehensive support:
- Design of LiFePO₄ systems
- Installation of Smart BMS 12-200
- Configuration of inverters, controllers, and monitoring systems
- Warranty and post-warranty service