|
Quantity
|
Total
|
||
|
|
|||
|
|
|||
Victron Inverter RS 48/6000 Smart Solar — is a premium-level hybrid inverter with an MPPT solar controller, ideal for high-power off-grid photovoltaic systems. This device combines a powerful 6 kVA inverter, a bidirectional DC-DC converter, a built-in 450 V DC 100 A MPPT controller, and advanced communication interfaces (VE.Can, VE.Direct, Bluetooth).
Despite its high power output, the device is compact, weighs only 11 kg, and is capable of delivering up to 96.5% efficiency, making it the ideal solution for any off-grid project—from camping to remote high-energy-consumption sites.
Key Benefits of the Inverter RS Smart Solar
-
All-in-one: 48/220V inverter, 450/100V solar controller, 100A charger.
-
Powerful 6 kVA inverter: 5300 W at 52 V and 4800 W at 46 V – power for heavy loads in a compact, lightweight housing!
-
Sine wave: perfect output voltage waveform, all equipment operates at its best.
-
High inverter overload capacity: perfectly starts high-power inductive loads such as electric motors, pumps, and compressors – 7000W for 4 minutes and 9000W for 3 seconds.
-
Built-in 450 V, 100 A MPPT controller – maximum solar energy conversion efficiency; use large and powerful solar panel arrays up to 8000 W!
-
Ultra-lightweight and quiet: only 11 kg thanks to high-frequency technology.
-
Bluetooth + VE.Can + VE.Direct: remote control, monitoring, firmware updates.
-
Wide MPPT input range: 65–450 VDC – compatible with a wide range of solar panels.
-
Maximum charging current up to 100 A: fast battery charging.
-
Programmable relay and I/O ports: automation, generator control, BMS compatibility.
-
Operating temperature range from –40 to +65°C: ideal for harsh climatic conditions, installation in outdoor cabinets, and unheated rooms.
-
Inverter parallel operation: connect up to 4 inverters in parallel to achieve up to 24 kVA of power!
-
Three-phase inverter operation: use 3, 6, 9, or 12 inverters for three-phase operation to achieve 18, 36, 54, and 72 kVA of power, respectively!
Technical Features
Hybrid Design
- The device includes an MPPT controller, a bidirectional DC-DC converter, and a sine-wave inverter. This allows it to automatically switch between charging the battery from the sun and powering the load, ensuring energy flexibility and independence.
450V 100A MPPT
- The MPPT controller with a wide range of 65–450 VDC allows two strings to be connected in parallel via MC4 connectors, without the need for a separate controller. This reduces system costs and simplifies installation. Maximum PV array power up to 8000 W.
Wide input voltage range
- The inverter operates from 38 to 62 V DC. It can be easily configured to work with all types of 48V batteries, including LiFePO4!
Communication interfaces
-
Bluetooth – quick connection via the VictronConnect App for setup and monitoring within a radius of ≤ 10 meters.
-
VE.Can – full connectivity to GX controllers for complete control via the internet, including software updates, changing settings, turning on and off, receiving push notifications, and much more, as well as synchronization of the inverter and BMS in LiFePO4 batteries.
-
VE.Direct – monitoring via GlobalLink 520 or VE.Direct to USB.
Remote control and automation
- The inverter features a programmable relay, 2 universal inputs/outputs, supports Victron smallBMS, and allows remote on/off via contacts.
Use Cases
-
Off-grid homes and cottages – fully independent power supply.
-
Farms / agricultural facilities – powering water pumps and refrigeration equipment.
-
Campgrounds and remote locations – quiet operation without a generator.
-
Small businesses and workshops – a powerful AC power source.
-
PV backup power systems – efficient battery charging and load power supply.