|
Quantity
|
Total
|
||
|
|
|||
|
|
|||
Victron Energy Multi RS 48/6000/100 Hybrid Inverter — is a high-tech and ultra-powerful next-generation inverter/charger with a nominal capacity of 6 kVA (up to 5.2 kW) and a record-breaking AC charging current of up to 88 A. It is perfectly suited for creating off-grid, hybrid, and backup power systems of any complexity. The inverter is built on innovative high-frequency technology, making it remarkably lightweight, highly efficient, and virtually silent in operation.
Special attention has been paid to system safety and longevity when operating with modern LiFePO₄ batteries, which are supported at the hardware level thanks to high-speed data exchange via the VE.Can bus.
Key Advantages of the Multi RS 48/6000/100 Hybrid Inverter
Most of the key parameters of the Multi RS series inverters are designed according to the highest European reliability standards, significantly outperforming mass-market and budget Asian solutions.
-
6000 VA / up to 5200 W Power, with a peak of 9000 W (for 3 seconds) or 7000 W (up to 4 minutes). High overload capability allows for the trouble-free startup of heavy inductive loads (pumps, compressors, air conditioners).
-
Unique PowerControl and PowerAssist Technologies — the inverter can limit power consumption from a weak grid or generator (to avoid overload) and, if necessary, instantly supplement the missing power from the battery. When the peak load subsides, the excess energy is automatically directed to recharge the battery bank.
-
Flexible Expansion with Solar Panels — the architecture allows adding solar chargers via both DC (external MPPTs via VE.Can/VE.Direct) and AC (grid-tied inverters on the AC output). The output of grid-tied solar inverters is automatically regulated by the built-in frequency-shift system.
-
High-Frequency Inverter Technology — a revolutionary low weight for this class of devices (only 11.2 kg), compact dimensions, and high efficiency.
-
Powerful Intelligent Charger — delivers an AC charging current of up to 88 A (at 57.6 V DC), ensuring ultra-fast battery capacity recovery.
-
Pure Sine Wave — a stable output voltage of 230 V ±2% and a frequency of 50 Hz ±0.1% guarantee the safe operation of even the most sensitive home electronics, gas boilers, and servers.
-
Maximum Efficiency up to 96.5% — one of the best energy efficiency ratings on the market, minimizing heat losses.
-
Extremely Low Self-Consumption — in idle mode, the inverter consumes only 20 W, preserving precious energy in the battery.
-
Industrial Temperature Range — stable operation from –40 to +65°C (forced intelligent fan cooling) allows the device to be installed in unheated technical rooms.
-
3-Phase System Scalability — supports building a full three-phase grid by connecting one Multi RS inverter per phase.
Technological Features
Intelligent Auxiliary Output Control (AC-out-2)
The inverter features an auxiliary AC output that connects directly to the grid input and is designed to power secondary (non-priority) loads. The load on this output is fully controlled and factored in by the smart PowerControl and PowerAssist energy distribution functions.
Flawless Integration with Lithium LiFePO₄ Batteries
Via the VE.Can interface, the inverter connects directly to the lithium battery BMS or GX monitoring systems (e.g., Cerbo GX). This enables the device to receive real-time, precise data on the state of charge (SOC), voltage, and temperature, and dynamically adjust charging currents to meet battery requirements, significantly extending its lifespan.
Built-in Display and Smart Bluetooth
Monitoring system parameters is now easier than ever. The inverter comes equipped with a built-in liquid crystal display for quick status checks. Furthermore, thanks to the integrated Bluetooth module, full configuration, firmware updates, and parameter monitoring can be done in seconds right from your smartphone via the free VictronConnect app.
Usage Scenarios
- Highly Reliable UPS Systems for Homes and Offices — instantaneous switching to backup power in the event of a main grid failure.
- Hybrid Solar Stations (ESS) — harvesting solar energy using additional controllers and optimizing consumption according to multi-tariff plans.
- Generator Integration — minimizing generator runtime by blending in battery power during peak load periods.
- Commercial Facilities and Small Businesses — protecting critical equipment and smoothing out demand spikes.
- Three-Phase Industrial Systems — combining three devices to provide power for facilities with 380 V three-phase loads.
Communication Interfaces and Peripherals
- VE.Can (2 ports) — for high-speed connection to GX devices (Cerbo GX) and compatible energy meters (e.g., Victron VM-3P75CT).
- VE.Direct — designed for connecting to GlobalLink 520 modules for remote cloud monitoring via cellular networks.
- Programmable Relays (Built-in) — ability to configure relays to trigger on a general alarm, low battery voltage, or for automatic generator start/stop (ATS).
- Sensor Inputs — connection for external temperature and battery terminal voltage sensors to ensure the most accurate charging algorithm.
Service and Support in Ukraine
By purchasing Victron Energy equipment, you receive uncompromising European quality and official technical support.
By contacting official partners, you get:
- Professional design of guaranteed power systems tailored to your needs;
- Qualified commissioning works and installation supervision;
- Full warranty and post-warranty service;
- Configuration and support of the remote monitoring system via the Victron VRM cloud portal.