|
Quantity
|
Total
|
||
|
|
|||
|
|
|||
Powercom Vanguard-II Modular — is a modular three-phase series of online UPS with hot-swap modules, designed for backup power supply of critical systems: data centers, server rooms, medical institutions, industrial processes and telecommunications infrastructure. The system has a scalable architecture, N+X parallel redundancy, extended communication interfaces (SNMP, RS-232, USB) and supports centralized monitoring. Diagnostics of a modular UPS requires mandatory testing of each power module separately — to ensure full functionality and detect degradation or failures.
What diagnostics include
Inspection / audit
- Visual assessment of the cabinet, modules, ventilation holes, interfaces, status indicators.
- Checking the correct installation of modules, uniformity of load by phases.
- Assessment of operating conditions: temperature, humidity, dust, air circulation.
Electrical tests
- Measurement of input voltage and frequency for each phase, symmetry check.
- Checking output voltage, frequency, signal stability under static and variable load.
- Simulation of emergency events (phase loss, voltage surges), recording of system response.
- Power factor analysis, harmonic distortion level, system efficiency.
Inverter / bypass / modules
- Checking the operation of the inverters of all modules: voltage, frequency compliance, synchronization.
- Evaluation of the internal bypass operation: switching between the inverter and the network without power interruption.
- Diagnostics of each power module separately: temperature, current, self-test, event history.
- Analysis of the system event log: failures, module failures, synchronization errors.
Battery (battery system)
- Inspection of battery cabinets or external battery modules: cleanliness of contacts, condition of terminals, absence of swelling.
- Measurement of voltage on each circuit, balance between batteries.
- Autonomous operation test with modular power supply: load holding time, stability.
- Checking the charging cascade of each module, the presence of a temperature compensation mode.
Cooling
- Checking the condition of the fans in each power module: efficiency, noise, temperature spikes.
- Measuring the temperature of key nodes under load and in standby.
- Inspection of ventilation systems, filters, absence of air flow blockages.
Communications / monitoring
- Checking the local LCD display: navigation, status messages, parameters.
- Testing SNMP, RS-232, USB: reading logs, communication with the monitoring server.
- Analysis of integration with centralized BMS/SCADA via Modbus or other protocols (if necessary).
Technical report
- Fixing the technical parameters of each module separately.
- Analysis of system stability, redundancy, battery status and load.
- Recommendations for module replacement, software updates, preventive maintenance.
When diagnostics are needed
- Every year or after 8-10 thousand hours of operation — as a preventive measure to prevent failures.
- After emergency operation on bypass or switching to battery power.
- After replacing/adding modules, updating firmware or installing new batteries.
- Before putting the system into operation after installation or downtime.
Why choose Total-Energo LLC
- Experience working with Powercom modular systems, including Vanguard-II Modular.
- Certified engineers and availability of specialized equipment for working with N+X configurations.
- Possibility of diagnostics without stopping critical load.
- Detailed report on each module with further recommendations and technical support.