|
Quantity
|
Total
|
||
|
|
|||
|
|
|||
SmartShunt 500A — is an intelligent shunt with full battery monitor functions that connects to your smartphone or GX device via built-in Bluetooth or VE.Direct port.
Ideal for modern systems with LiFePO₄, AGM and GEL batteries, where there is no need for a physical display — all information is available in the VictronConnect application or on Cerbo GX, Ekrano GX devices. Supports synchronization with Marine MFD chartplotters: Navico, Raymarine, Garmin, Furuno.
Key advantages of the Victron SmartShunt battery monitor
- No display — space saving, full control via Bluetooth
- Built-in Bluetooth Smart — for smartphone or tablet
- VE.Direct port — for integration into VRM, Cerbo GX and other systems
- Current output up to 500 A
- Measurement:
- % charge (SoC)
- Current
- Voltage
- Capacity, Ah
- Time to full discharge
- Midpoint voltage monitoring — for sectional batteries
- Temperature compensation of charge (option)
- Programmable relay — generator, alarm or load control
- Extremely low power consumption
Technical specifications
- Maximum current: 500 A
- Battery operating voltage: 6.5 – 70 V DC
- Shunt: 500 A / 50 mV
- VE.Direct port: yes
- Bluetooth Smart: integrated
- Relay output: yes, programmable
- Temperature sensor: supported (ASS000100000)
- Midpoint voltage monitoring: yes
- Power supply: from battery, consumption: ≤1 mA
- Mounting: on DIN rail or in a panel
Usage scenarios
- ESS systems based on LiFePO₄ batteries
- Standalone systems with limited display space
- Campers, mobile homes and yachts
- Industrial projects with centralized monitoring via Cerbo GX
- Telecommunication nodes with reliable voltage and charge monitoring
Communication and monitoring interfaces
- Bluetooth Smart— connection to VictronConnect
- VE.Direct port — connection to GX devices, VRM portal
- Programmable relay — generator operation automation or alarms
- Temperature sensor input — precise charge adjustment
Midpoint voltage monitoring
Battery midpoint monitoring function — it is:
- Balance control between two series-connected sections
- Detection of asymmetry and potential damage to the cans
- Automatic warning when the midpoint voltage deviates
- Especially important for 24/48 V systems with LiFePO₄ batteries!
Fuel generator control
The SmartShunt programmable relay allows:
Automatically start the generator when:
- SoC drops below 50%
- Battery voltage drops to a set limit
Turn off the generator when:
- Battery charge reaches 95%
- Current drops to a stable value
Works best with LiFePO₄ where:
- Charging is short
- Currents are high
- Accuracy and fast system response are required
Related Victron Energy products
Temperature Sensor – ASS000100000
VE.Direct to USB Interface – ASS030530010
Cerbo GX / Ekrano GX – for centralized monitoring
VRM-portal – for remote control