|
Quantity
|
Total
|
||
|
|
|||
|
|
|||
The US3000C module is Pylontech's flagship LiFePO4 (lithium iron phosphate) battery, designed for use in modern home, industrial, and office power systems. With built-in BMS, high depth of discharge of 95%, long service life of up to 8000 cycles and flexible scalability, the US3000C battery is an ideal solution for solar energy storage, backup power and intelligent load management.
Key advantages of the Pylontech battery
- Capacity: 3.5 kWh (nominal), 3.3 kWh (useful)
- Nominal voltage: 48 V
- Depth of discharge (DoD): up to 95%
- Life cycle: >8000 cycles at 25°C
- Compatibility with inverters Victron, SMA, Studer, Growatt, Solis, etc.
- Built-in cell balancing and BMS protection against overvoltage, overload, overheating
- Safety certificates: TÜV, CE, UL1973, UL9540A, UN38.3, IEC62619
- Scalability: up to 16 modules in parallel, up to 76.8 kW·h, using an external BMS the total number of parallel modules can be increased
- 5 + 5 year warranty – 5 years from the importer LLC “Total-Energo” and an additional 5 years after product registration on the manufacturer's website
Built-in intelligent functions
- Soft Start — starting current limitation for inverter protection
- Automatic address detection in a multi-module system
- Error signaling via LED and dry contacts
- Support for remote start via 5-12V signal
- Built-in temperature and voltage monitoring of each cell
Compatibility of Pylontech US3000C with Victron Energy
Pylontech US3000C is officially compatible with all Victron Energy devices via CAN or RS485 interface. Full integration is supported with the following systems:
- MultiPlus / Quattro / MultiPlus-II / Quattro-II inverters and other Victron Energy inverters
- SmartSolar MPPT, BlueSolar MPPT solar chargers and powerful SmartSolar MPPT RS
Synchronization is achieved thanks to the Cerbo GX / Ekrano GX / Color Control GX communication centers – monitoring of SOC, errors, temperature, voltage of US3000C units and all other parameters. Also, the batteries are fully “visible” from anywhere in the world in the VRM Portal – proprietary remote monitoring and control in the VRM application for phones or via the WEB interface.
DVCC (Distributed Voltage and Current Control) – precise charge control, allows you to set voltage and current limits for charging batteries from multiple devices simultaneously: an inverter and its charger, a solar panel charge controller or several such controllers, external chargers and any other elements that may affect the charging current of batteries.
Pylontech US5000 — LiFePO4 battery for backup and autonomous power systems. Supports automatic BMS operation and is compatible with Victron systems without additional configuration.
Usage scenarios
- Home solar systems with ESS — energy storage during the day, power supply at night.
- Industrial and office solutions — load stabilization, peak cutting.
- Mobile solutions and boats — backup power and energy independence.
-
Backup power systems with Victron inverters
Service support in Ukraine
LLC “Total-Energo” — certified Pylontech partner in Ukraine. We provide:
- Selection of compatible batteries and inverters
- Victron + Pylontech integration
- Configuration of CAN communication, SOC, DVCC, charge control
- Technical support and service throughout Ukraine