|
Quantity
|
Total
|
||
|
|
|||
|
|
|||
Battery Victron Lithium SuperPack 12.8V/100Ah High current – is a modern lithium iron phosphate battery (LiFePO4) with built-in BMS and overload protection, which does not require additional components to operate. Due to its compact design, high reliability and safe operation, this battery is ideal for both autonomous and backup power systems.
Key advantages of the LiFePO4 battery Victron Lithium SuperPack
- Built-in BMS and protection – automatically turns off the battery when overloaded, overheated or over-discharged.
- High energy efficiency – up to 92% efficiency of the full charge/discharge cycle.
- Peak discharge current up to 150A, which allows you to connect powerful inverters.
- Does not require full charging – LiFePO4 batteries work better even with a partial charge.
- Absolute safety – the battery is automatically protected from low or high temperatures.
- Does not require an external BMS – everything is integrated inside.
- Can be installed on its side (except for the positions specified in the technical documentation).
- Low self-discharge – up to 1 year of storage at full charge.
Technological features
- Chemistry: LiFePO4
- Nominal voltage: 12.8 V
- Capacity @ 25°C: 100 A·h
- Cyclic life: over 2500 cycles at 80% DoD
- Max. charge current: 100 A
- Max. constant discharge current: 100 A
- Peak current (10 s): 150 A
- Low / high temperature protection – charge from 0°C, discharge from -20°C
- IP43 protection, moisture protection up to 95% (non-condensing)
- Weight: 14 kg
Usage scenarios
- Off-grid solar systems – built-in protection simplifies installation without an external BMS.
- Campers, yachts and mobile offices – compact and safe battery for mobile systems.
- Backup power systems – due to low self-discharge, it is ideal for infrequent use.
- Systems with high current consumption – inverters up to 1000-1200 W operate without interruption.
- Industrial equipment – for stable power supply of critical systems.
ESS and integration with Victron Energy
Victron Lithium SuperPack 12.8V/100Ah integrates perfectly with systems:
- SmartSolar MPPT and BlueSolar MPPT – for efficient charging.
- MultiPlus / Quattro / Inverter RS – load power with flexible configurations.
- GX-modules: Ekrano GX, Cerbo GX – control via VRM.
- SmartShunt or BMV-712 – monitoring of charge level and cycle history.
Difference from other batteries
Victron SuperPack - everything is integrated. Compared to LiFePO4 Smart batteries, it does not require an external BMS, but does not support serial connection. It is suitable for small systems where simplicity is key.
Quality charge and monitoring
- Chargers: Blue Smart IP22 / IP65 / IP67 Charger
- Monitoring: SmartShunt 500A / BMV-712 Smart
- Integration with inverters: via battery monitors
- Charge control from the generator: DC-DC Orion-Tr Smart